-
TDA1521 Audio Power Amplifier Board Module
The TDA1521 Audio Power Amplifier Board is a dual-channel DIY stereo amplifier module offering a stated 2 × 15W output for compatible speakers. It features an integrated rectifier and filter circuit, allowing connection to a suitable transformer-based power supply. The module is ideal for DIY audio systems, speaker modification, desktop amplifiers, and electronics projects. A sufficiently large heat sink is required before testing or operation to ensure proper heat dissipation and stable performance.
₹188.80 incl. GST (₹160.00 + GST)TDA1521 Audio Power Amplifier Board Module
₹188.80 incl. GST (₹160.00 + GST) -
NE555 Pulse Adjustable Square Wave Signal Generator Module
The NE555 Pulse Adjustable Square Wave Signal Generator Module is a compact signal generator based on the NE555 timer IC, designed to produce adjustable pulse, square-wave, and rectangular signals. It supports a wide 1Hz–200kHz frequency range with four selectable ranges and adjustable duty cycle. Operating from 5V–15V DC, it features an onboard LED indicator and provides a compact 31 × 22mm design. Ideal for frequency testing, PWM experiments, timing circuits, signal generation, Arduino projects, and DIY electronics.
₹50.74 incl. GST (₹43.00 + GST)NE555 Pulse Adjustable Square Wave Signal Generator Module
₹50.74 incl. GST (₹43.00 + GST) -
150W DC 12V to AC 110V/220V Inverter Boost Module
The 150W DC 12V to AC 110V/220V Inverter Boost Module converts 12V DC input into high-frequency square-wave AC output with selectable voltage levels of approximately 110V, 172V, 200V, and 220V. With a compact 58 × 58 × 28mm design and approximately 120g weight, it is suitable for DIY inverter projects, vehicle power applications, and electronics prototyping. The module operates at approximately 20kHz and supports up to 150W under suitable conditions. Do not use directly with motors, fans, coils, or other incompatible inductive loads, and provide proper cooling for heavy loads.
₹566.40 incl. GST (₹480.00 + GST)150W DC 12V to AC 110V/220V Inverter Boost Module
₹566.40 incl. GST (₹480.00 + GST) -
MKS DLC32 V2.1 ESP32 WiFi GRBL Offline Controller
The MKS DLC32 V2.1 is a 32-bit ESP32 WiFi GRBL controller designed for desktop laser engravers and GRBL-based CNC motion projects. It features a 3.5-inch TFT colour touchscreen for convenient offline machine control and supports wireless operation over WiFi. With high-frequency PWM, it is suitable for smooth laser power control and grayscale engraving, with speeds up to 8000 mm/min as stated. Compatible with LightBurn and GRBLaser, it is ideal for DIY laser engravers, CNC projects, workshops, and maker applications.
₹2,029.60 incl. GST (₹1,720.00 + GST)MKS DLC32 V2.1 ESP32 WiFi GRBL Offline Controller
₹2,029.60 incl. GST (₹1,720.00 + GST) -
Hall Effect Sensor Module
The Hall Effect Counter Sensor Module is a compact magnetic detection module based on the 3144E Hall Effect sensor and LM393 comparator. It detects magnets and magnetic-field changes and provides a clean digital HIGH/LOW output, making it ideal for motor speed measurement, wheel rotation, object counting, and position detection. It operates from 3.3V–5V DC, includes power and signal LEDs, and features M3 mounting holes for easy installation. Suitable for Arduino, robotics, automation, and DIY electronics projects.
₹53.10 incl. GST (₹45.00 + GST)Hall Effect Sensor Module
₹53.10 incl. GST (₹45.00 + GST) -
WeAct Studio CH32V203C8T6 RISC-V Low Power Core Demo Board
The WeAct Studio CH32V203C8T6 Demo Board is a high-performance, low-power RISC-V development board powered by the QingKe V4B processor with a clock speed of up to 144MHz. It features 20KB SRAM, 64KB Flash, 3.3V operation, and multiple low-power modes for energy-efficient applications. With USB 2.0, UART, CAN, IIC, SPI, 12-bit ADC, TouchKey, DMA, timers, and 2-wire debugging, it offers versatile connectivity for embedded projects. Ideal for IoT, robotics, automation, sensor systems, and RISC-V development.
₹311.52 incl. GST (₹264.00 + GST)WeAct Studio CH32V203C8T6 RISC-V Low Power Core Demo Board
₹311.52 incl. GST (₹264.00 + GST) -
RC522 Mini RFID 13.56MHz IC Card Reader Writer Module
The RC522 Mini RFID Reader/Writer Module is a compact 13.56MHz contactless RFID module based on the MFRC522 chip. It supports compatible MIFARE cards and tags and communicates with microcontrollers through the SPI interface. Compatible with Arduino, ESP32, ESP8266, Raspberry Pi, and STM32, it is ideal for access control, smart locks, attendance systems, inventory tracking, and IoT projects.
₹93.22 incl. GST (₹79.00 + GST)RC522 Mini RFID 13.56MHz IC Card Reader Writer Module
₹93.22 incl. GST (₹79.00 + GST) -
Black WG26/34 125KHz RFID Contactless IP65 Smart Card Reader
The WG26/34 125KHz RFID Smart Card Reader is a contactless RFID reader designed for access control, attendance, and identification systems. It supports Wiegand 26/34-bit communication and is compatible with TK4001, EM4100, and similar 125KHz RFID cards. With an IP65-rated design, built-in buzzer, and external LED/buzzer control inputs, it is suitable for both indoor and outdoor applications.
₹658.44 incl. GST (₹558.00 + GST)Black WG26/34 125KHz RFID Contactless IP65 Smart Card Reader
₹658.44 incl. GST (₹558.00 + GST) -
TD-8130MG 30KG 180° High Torque Digital Metal Gear Waterproof Servo Motor
TD-8130MG 30KG 180° Digital Metal Gear Servo Motor is a high-torque servo featuring up to 32 kg·cm peak stall torque, 4.8V–8.4V operation, 180° controllable positioning, 5-metal-gear transmission, dual ball bearings, 25T output spline and digital PWM control. Ideal for robotic arms, humanoid robots, RC vehicles and high-load robotic applications.
₹1,570.58 incl. GST (₹1,331.00 + GST)TD-8130MG 30KG 180° High Torque Digital Metal Gear Waterproof Servo Motor
₹1,570.58 incl. GST (₹1,331.00 + GST) -
TD-8135MG 35KG 180° High Torque Digital Metal Gear Servo Motor
TD-8135MG 35KG 180° High Torque Digital Metal Gear Servo Motor is a powerful robotics servo featuring up to 35.2 kg·cm torque, 4.8V–8.4V operation, reinforced metal gears, dual ball bearings, digital PWM control and a durable aluminium-alloy middle housing. Ideal for robotic arms, humanoid robots, RC models and high-torque robotics applications.
₹1,746.40 incl. GST (₹1,480.00 + GST)TD-8135MG 35KG 180° High Torque Digital Metal Gear Servo Motor
₹1,746.40 incl. GST (₹1,480.00 + GST) -
Oblique U Shape Aluminium Servo Bracket – Multi-Axis Servo Joint Mount
Oblique U Shape Aluminium Servo Bracket – Multi-Axis Servo Joint Mount is a lightweight and strong 2mm aluminium bracket designed for standard-sized servo motors. Its angled U-shaped design and multiple mounting holes make it ideal for multi-axis joints, robotic arms, legs, humanoid robots, and custom servo-driven mechanisms.
₹187.62 incl. GST (₹159.00 + GST)Oblique U Shape Aluminium Servo Bracket – Multi-Axis Servo Joint Mount
₹187.62 incl. GST (₹159.00 + GST) -
Long U Aluminium Servo Bracket – Multi-Axis Servo Joint Mount
Long U Aluminium Servo Bracket – Multi-Axis Servo Joint Mount is a lightweight and strong 2mm aluminium bracket designed for standard-sized servo motors. Its long U-shaped design and multiple mounting holes make it ideal for multi-axis joints, robotic arms, legs, walking robots, and custom servo-driven mechanisms.
₹158.12 incl. GST (₹134.00 + GST)Long U Aluminium Servo Bracket – Multi-Axis Servo Joint Mount
₹158.12 incl. GST (₹134.00 + GST)
Shop By Category
- Hot Promotions
- Clearance Sale
- Artificial Intelligence/AIOT
- Arduino and Shields
- CNC and 3D printing
- Development Boards
- Displays
- DIY and KITS
- E Bike
- IOT and BLE
- Motors
- Motor Drives
- Power Supply
- Prototyping Tools
- Quadcopters and RC
- Raspberry Pi
- Sensors and Modules
- Radar and UWB
- Robotics
- Wireless
- Miscellaneous
