Sensors
-
VL53L0X V2 Laser Ranging ToF Sensor Module
The VL53L0XV2 Laser Ranging ToF Sensor Module uses Time-of-Flight technology to measure the distance between the sensor and an object without physical contact. Featuring a Serial PWM interface, purple PCB, and unsoldered components, it is suitable for robotics, obstacle detection, automation, gesture recognition experiments, and microcontroller-based distance-measurement projects.
₹187.62 incl. GST (₹159.00 + GST)VL53L0X V2 Laser Ranging ToF Sensor Module
₹187.62 incl. GST (₹159.00 + GST) -
YF-S402 Water Flow Sensor – Digital Water Flow Rate Measurement Module
The YF-S402 Water Flow Sensor is a compact digital sensor designed to measure water flow using a turbine rotor and Hall effect sensing technology. Operating at 5V–24V DC, it supports a stated flow range of 0.3–6 L/min and generates digital pulses proportional to flow rate. It can be interfaced with compatible Arduino, ESP32, and other microcontroller-based systems for irrigation, water dispensers, coffee machines, plumbing monitoring, and smart water management projects.
₹312.70 incl. GST (₹265.00 + GST)YF-S402 Water Flow Sensor – Digital Water Flow Rate Measurement Module
₹312.70 incl. GST (₹265.00 + GST) -
DC-DC 600W 10–60V to 12–80V Step-Up Boost Converter Module
The DC-DC 600W Step-Up Boost Converter Module is designed to increase DC input voltage from a stated range of 10–60V to an adjustable output of 12–80V. It features adjustable output current and a large bottom heatsink for improved heat dissipation. Suitable for compatible power supply projects, electronics prototyping, LED systems, and DC power conversion applications. Actual output power depends on operating conditions, current limits, and cooling.
₹837.80 incl. GST (₹710.00 + GST)DC-DC 600W 10–60V to 12–80V Step-Up Boost Converter Module
₹837.80 incl. GST (₹710.00 + GST) -
1200W DC-DC Boost Step-Up Converter – 10–60V Input, 12–83V Output
The 1200W DC-DC Boost Step-Up Converter is an adjustable power module designed to increase DC input voltage from 10–60V to 12–83V DC. It features separate voltage and current adjustment potentiometers, a large heatsink, screw-terminal connections, and overcurrent and short-circuit protection as specified. With a stated maximum input current of 20A, output current of 12A, and efficiency of up to 95%, it is suitable for compatible LED drivers, battery charging systems, solar projects, vehicle power supplies, and adjustable DC power applications. Actual output power depends on operating conditions and cooling.
₹837.80 incl. GST (₹710.00 + GST)1200W DC-DC Boost Step-Up Converter – 10–60V Input, 12–83V Output
₹837.80 incl. GST (₹710.00 + GST) -
Square 3M Cable Float Switch for Industrial Pump and Tank Level Control – IP68
The Square 3M Cable Float Switch for Industrial Pump and Tank Level Control is an automatic liquid-level switch designed to control pumps, motors, and compatible valves based on liquid levels. It features a 3-metre cable, IP68 protection rating, double-chamber sealed construction, and a 0°C to 75°C operating temperature range. With a specified electrical rating of 10(8A) at 250V AC and 10(4A) at 380V AC, it is suitable for water tanks, sumps, sewage systems, industrial pumping, and liquid-level alarms. Not explosion-proof.
₹271.40 incl. GST (₹230.00 + GST)Square 3M Cable Float Switch for Industrial Pump and Tank Level Control – IP68
₹271.40 incl. GST (₹230.00 + GST) -
MCP2515 CAN Bus Module with TJA1050 Transceiver – SPI Interface
The MCP2515 CAN Bus Module with TJA1050 Transceiver adds CAN 2.0B communication to Arduino and other SPI-compatible microcontrollers. It supports communication speeds up to 1 Mbps, standard and extended CAN frames, and data fields up to 8 bytes. Featuring a 5V power input, SPI interface, INT pin, CANH/CANL connections, and selectable 120Ω termination, it is suitable for automotive prototyping, industrial automation, robotics, and embedded CAN communication projects.
₹109.74 incl. GST (₹93.00 + GST)MCP2515 CAN Bus Module with TJA1050 Transceiver – SPI Interface
₹109.74 incl. GST (₹93.00 + GST) -
HR202 Humidity Detection Sensor Module – Adjustable Digital & Analog Output
The HR202 Humidity Detection Sensor Module is a compact humidity sensing module featuring an HR202 sensor and LM393 comparator for reliable ambient humidity detection. It provides adjustable sensitivity, analog AO output, and digital DO output, with onboard power and output indication LEDs. The module can be connected to Arduino, ESP32, and other microcontrollers for humidity monitoring and automatic control applications. It is suitable for greenhouse projects, IoT systems, environmental monitoring, humidity alarms, and humidity control.
₹63.72 incl. GST (₹54.00 + GST)HR202 Humidity Detection Sensor Module – Adjustable Digital & Analog Output
₹63.72 incl. GST (₹54.00 + GST) -
MP-4 Air Quality Detection Gas Sensor Module
The MP-4 Air Quality Detection Gas Sensor Module uses a metal oxide semiconductor gas-sensitive layer and integrated heater to detect changes caused by smoke, propane, and combustible gases. It offers high sensitivity, fast response and recovery, low power consumption, long service life, and a durable metal casing. The compact sensor is suitable for air-quality monitoring, gas detection, safety projects, industrial monitoring, Arduino, and IoT applications. Package includes 1 MP-4 sensor module and 1 header pin.
₹236.00 incl. GST (₹200.00 + GST)MP-4 Air Quality Detection Gas Sensor Module
₹236.00 incl. GST (₹200.00 + GST) -
HDS10 Condensation Sensor – High-Sensitivity Digital Moisture Detection Sensor
The HDS10 Condensation Sensor is a compact, high-sensitivity device designed to detect and monitor condensation and moisture conditions. It offers rapid response, durable construction, low power consumption, easy installation, and digital output for convenient integration with monitoring and control systems. Suitable for HVAC systems, data centers, industrial equipment, environmental monitoring, and moisture protection applications.
₹47.20 incl. GST (₹40.00 + GST)HDS10 Condensation Sensor – High-Sensitivity Digital Moisture Detection Sensor
₹47.20 incl. GST (₹40.00 + GST) -
GY MPU 9250/6500 6-Axis Accelerometer Gyroscope Sensor Module – Without Magnetometer
The GY MPU 9250/6500 6-Axis Accelerometer Gyroscope Sensor Module – Without Magnetometer provides 3-axis acceleration and 3-axis angular velocity sensing for robotics, balancing, motion tracking, vibration monitoring, and embedded applications. It supports I²C communication with a typical default address of
0x68. This version does not provide usable magnetometer functionality and should be treated strictly as a 6-axis IMU.₹357.54 incl. GST (₹303.00 + GST)GY MPU 9250/6500 6-Axis Accelerometer Gyroscope Sensor Module – Without Magnetometer
₹357.54 incl. GST (₹303.00 + GST) -
TCS34725 RGB Color Sensor Module
The TCS34725 RGB Color Sensor Module is a digital color and ambient-light sensor designed to measure red, green, blue, and clear light. It features an integrated IR blocking filter, high sensitivity, wide dynamic range, adjustable gain and integration time, and a built-in white LED for stable illumination. With an I2C interface and interrupt output, it can be easily integrated with Arduino, ESP32, Raspberry Pi, and other microcontrollers. Ideal for color detection, ambient-light sensing, RGB LED control, industrial automation, consumer electronics, and IoT projects.
₹365.80 incl. GST (₹310.00 + GST)TCS34725 RGB Color Sensor Module
₹365.80 incl. GST (₹310.00 + GST) -
MAX30100 Heart Rate and Pulse Oximeter Sensor Module
The MAX30100 Heart Rate and Pulse Oximeter Sensor Module is a compact biometric sensor designed for heart rate and SpO2 monitoring. It combines red and infrared LEDs, a sensitive photodetector, and ambient-light cancellation for reliable optical sensing. Featuring I2C communication, 1.8–3.3V operation, programmable sample rate and LED current, it is compatible with Arduino, ESP32, and Raspberry Pi. Ideal for wearable devices, fitness projects, IoT health monitoring, and educational applications.
₹141.60 incl. GST (₹120.00 + GST)MAX30100 Heart Rate and Pulse Oximeter Sensor Module
₹141.60 incl. GST (₹120.00 + GST)
Buy sensors online in India for robotics, IoT, automation, embedded systems, smart agriculture, electronics learning, industrial monitoring and prototype development. Robosap stocks sensor modules for Arduino, ESP32, Raspberry Pi and microcontroller projects, including analog sensors, digital sensors, communication modules, field probes and measurement boards.
Use this Sensors category as a starting point when selecting modules by application or measurement type. For farming and irrigation projects, explore soil moisture, pH, NPK, EC and RS485 soil probes. For access control and identity projects, choose fingerprint and biometric modules. For electronics power monitoring, use current, voltage and energy sensors such as ACS712, INA219, INA226, PZEM-004T, SCT-013 and ZMPT101B modules. For industrial wiring and field devices, RS485 and Modbus modules can help with longer-distance communication.
Explore sensor categories: Agriculture & Soil Sensors, Fingerprint & Biometric Sensors, Biomedical Sensors, Industrial RS485 & Modbus Sensors, Current, Voltage & Energy Sensors, mmWave Radar Sensors and UWB Modules.
Related categories: Sensors and Modules, Development Boards, ESP32 Boards, Arduino and Shields, IoT and BLE, Displays and Power Supply.
