-
₹295.00 incl. GST (₹250.00 + GST)HD-W3A Wi-Fi LED Display Controller Card
₹295.00 incl. GST (₹250.00 + GST) -
MP135 / MP503 Air Quality & Gas Sensor
The MP135 / MP503 Gas Sensor is a compact metal-oxide semiconductor sensor designed for air-quality monitoring and gas detection, with good sensitivity to methane. It features fast response and recovery, low power consumption, good stability, strong anti-interference capability, and long service life. The sensor’s conductivity changes with gas concentration, allowing a simple external circuit or microcontroller to measure the variation. It is suitable for Arduino, IoT, gas detection, environmental monitoring, and DIY electronics projects.
₹389.40 incl. GST (₹330.00 + GST)MP135 / MP503 Air Quality & Gas Sensor
₹389.40 incl. GST (₹330.00 + GST) -
Hi-Link HLK-PM01 5V 3W AC-DC Isolated Power Supply Module
The Hi-Link HLK-PM01 5V/3W AC-DC Power Supply Module is a compact, isolated switching power supply designed to convert 90–264V AC mains input into a stable 5V DC output. With a 3W power rating, it is suitable for powering microcontrollers, sensors, IoT devices, relay modules, automation systems, and other low-power electronics. It features overload and short-circuit protection, low ripple, high efficiency, low power consumption, and natural cooling. Its compact PCB-mountable design makes it ideal for embedded and DIY electronics projects.
₹259.60 incl. GST (₹220.00 + GST)Hi-Link HLK-PM01 5V 3W AC-DC Isolated Power Supply Module
₹259.60 incl. GST (₹220.00 + GST) -
12V DC to 220V AC 40W Step-Up Inverter Booster Module
The 12V DC to 220V AC 40W Step-Up Inverter Module converts 8V–13V DC input into approximately 220V AC output using a high-frequency switching circuit. With a compact 43 × 38 × 25mm design and 40W rated power, it is suitable for DIY inverter projects, battery-powered systems, compatible LED lights, and energy-saving lamps. The output is a high-frequency square wave, so it is not suitable for motors, fans, coils, or other incompatible inductive loads. Do not overload or short-circuit the output, and use proper high-voltage safety precautions.
₹194.70 incl. GST (₹165.00 + GST)12V DC to 220V AC 40W Step-Up Inverter Booster Module
₹194.70 incl. GST (₹165.00 + GST) -
TPL0501 100KΩ 256-Position Digital Potentiometer Module
The TPL0501 Digital Potentiometer Module is a high-precision, single-channel digital resistor featuring 256 programmable positions and 100KΩ resistance. It uses an SPI-compatible interface and operates from 2.7V to 5.5V, making it suitable for Arduino, STM32, ESP32, and other microcontroller projects. It is ideal for sensor calibration, amplifier gain control, voltage adjustment, electronic trimming, and replacing mechanical potentiometers in programmable circuits.
₹566.40 incl. GST (₹480.00 + GST)TPL0501 100KΩ 256-Position Digital Potentiometer Module
₹566.40 incl. GST (₹480.00 + GST) -
TDA1521 Audio Power Amplifier Board Module
The TDA1521 Audio Power Amplifier Board is a dual-channel DIY stereo amplifier module offering a stated 2 × 15W output for compatible speakers. It features an integrated rectifier and filter circuit, allowing connection to a suitable transformer-based power supply. The module is ideal for DIY audio systems, speaker modification, desktop amplifiers, and electronics projects. A sufficiently large heat sink is required before testing or operation to ensure proper heat dissipation and stable performance.
₹188.80 incl. GST (₹160.00 + GST)TDA1521 Audio Power Amplifier Board Module
₹188.80 incl. GST (₹160.00 + GST) -
NE555 Pulse Adjustable Square Wave Signal Generator Module
The NE555 Pulse Adjustable Square Wave Signal Generator Module is a compact signal generator based on the NE555 timer IC, designed to produce adjustable pulse, square-wave, and rectangular signals. It supports a wide 1Hz–200kHz frequency range with four selectable ranges and adjustable duty cycle. Operating from 5V–15V DC, it features an onboard LED indicator and provides a compact 31 × 22mm design. Ideal for frequency testing, PWM experiments, timing circuits, signal generation, Arduino projects, and DIY electronics.
₹50.74 incl. GST (₹43.00 + GST)NE555 Pulse Adjustable Square Wave Signal Generator Module
₹50.74 incl. GST (₹43.00 + GST) -
150W DC 12V to AC 110V/220V Inverter Boost Module
The 150W DC 12V to AC 110V/220V Inverter Boost Module converts 12V DC input into high-frequency square-wave AC output with selectable voltage levels of approximately 110V, 172V, 200V, and 220V. With a compact 58 × 58 × 28mm design and approximately 120g weight, it is suitable for DIY inverter projects, vehicle power applications, and electronics prototyping. The module operates at approximately 20kHz and supports up to 150W under suitable conditions. Do not use directly with motors, fans, coils, or other incompatible inductive loads, and provide proper cooling for heavy loads.
₹566.40 incl. GST (₹480.00 + GST)150W DC 12V to AC 110V/220V Inverter Boost Module
₹566.40 incl. GST (₹480.00 + GST) -
MKS DLC32 V2.1 ESP32 WiFi GRBL Offline Controller
The MKS DLC32 V2.1 is a 32-bit ESP32 WiFi GRBL controller designed for desktop laser engravers and GRBL-based CNC motion projects. It features a 3.5-inch TFT colour touchscreen for convenient offline machine control and supports wireless operation over WiFi. With high-frequency PWM, it is suitable for smooth laser power control and grayscale engraving, with speeds up to 8000 mm/min as stated. Compatible with LightBurn and GRBLaser, it is ideal for DIY laser engravers, CNC projects, workshops, and maker applications.
₹2,029.60 incl. GST (₹1,720.00 + GST)MKS DLC32 V2.1 ESP32 WiFi GRBL Offline Controller
₹2,029.60 incl. GST (₹1,720.00 + GST) -
Hall Effect Sensor Module
The Hall Effect Counter Sensor Module is a compact magnetic detection module based on the 3144E Hall Effect sensor and LM393 comparator. It detects magnets and magnetic-field changes and provides a clean digital HIGH/LOW output, making it ideal for motor speed measurement, wheel rotation, object counting, and position detection. It operates from 3.3V–5V DC, includes power and signal LEDs, and features M3 mounting holes for easy installation. Suitable for Arduino, robotics, automation, and DIY electronics projects.
₹53.10 incl. GST (₹45.00 + GST)Hall Effect Sensor Module
₹53.10 incl. GST (₹45.00 + GST) -
ESP32-S3-N16R8 Development Board with RHYX-M21-45 Camera
The ESP32-S3-N16R8 Development Board is a powerful dual-core development board featuring the ESP32-S3 processor up to 240MHz, 8MB Flash, and 8MB PSRAM. It includes Wi-Fi, Bluetooth 5.0 BLE, 45 GPIOs, camera interface, and dual USB Type-C ports, making it ideal for AI vision, image processing, IoT, and edge-computing applications. Compatible with Arduino IDE, ESP-IDF, and MicroPython, it supports projects such as face recognition, object detection, robotics, and smart automation. The package includes an RHYX-M21-45 camera and two 20-pin male header strips.
₹991.20 incl. GST (₹840.00 + GST)ESP32-S3-N16R8 Development Board with RHYX-M21-45 Camera
₹991.20 incl. GST (₹840.00 + GST) -
WeAct Studio CH32V203C8T6 RISC-V Low Power Core Demo Board
The WeAct Studio CH32V203C8T6 Demo Board is a high-performance, low-power RISC-V development board powered by the QingKe V4B processor with a clock speed of up to 144MHz. It features 20KB SRAM, 64KB Flash, 3.3V operation, and multiple low-power modes for energy-efficient applications. With USB 2.0, UART, CAN, IIC, SPI, 12-bit ADC, TouchKey, DMA, timers, and 2-wire debugging, it offers versatile connectivity for embedded projects. Ideal for IoT, robotics, automation, sensor systems, and RISC-V development.
₹311.52 incl. GST (₹264.00 + GST)WeAct Studio CH32V203C8T6 RISC-V Low Power Core Demo Board
₹311.52 incl. GST (₹264.00 + GST)
Shop By Category
- Hot Promotions
- Clearance Sale
- Artificial Intelligence/AIOT
- Arduino and Shields
- CNC and 3D printing
- Development Boards
- Displays
- DIY and KITS
- E Bike
- IOT and BLE
- Motors
- Motor Drives
- Power Supply
- Prototyping Tools
- Quadcopters and RC
- Raspberry Pi
- Sensors and Modules
- Radar and UWB
- Robotics
- Wireless
- Miscellaneous
