YCHIOT MAX5007-SMA Long Range UWB Module – DW1000, 1 km, SPI

4,944.20 incl. GST (4,190.00 + GST)

8 in stock

The YCHIOT MAX5007-SMA Long Range UWB Module is a high-power DW1000-based UWB transceiver designed for long-range communication, precision ranging, and positioning applications. It supports communication distances of up to approximately 1 km, data rates up to 6.8 Mbps, and TWR/TDOA positioning. The module features integrated PA/LNA, SPI interface, and an external SMA antenna connector. It is suitable for RTLS, robotics, asset tracking, industrial positioning, and distance measurement applications.

SKU: ro-8194 Category:
Product Description

The YCHIOT MAX5007-SMA Long Range UWB Module is a high-power Ultra-Wideband (UWB) transceiver module based on the Decawave DW1000 chipset. It is designed for long-range wireless communication, precision distance measurement, Real-Time Location Systems (RTLS), robotics, industrial automation, asset tracking, and positioning applications.

The module integrates a UWB transceiver with Power Amplifier (PA) and Low Noise Amplifier (LNA) circuitry to provide extended communication range compared with standard DW1000-based modules. According to the manufacturer, the module can achieve a communication distance of up to approximately 1000 m (1 km) under suitable conditions.

The MAX5007-SMA supports data rates of 110 kbps, 850 kbps, and 6.8 Mbps, making it suitable for applications requiring either long-range communication or higher-speed UWB data transfer. It supports Two-Way Ranging (TWR) and Time Difference of Arrival (TDOA) positioning methods.

The manufacturer specifies positioning/ranging accuracy of up to approximately 10 cm under suitable system conditions. Actual accuracy and range depend on antenna selection, RF configuration, line-of-sight conditions, installation environment, calibration, transmit power, and applicable RF regulations.

This SMA version features an external SMA antenna connector, allowing a suitable UWB antenna to be selected according to the required application and operating conditions.

Features

  • High-power Ultra-Wideband (UWB) transceiver module
  • Based on Decawave DW1000 UWB chipset
  • Integrated Power Amplifier (PA)
  • Integrated Low Noise Amplifier (LNA)
  • Manufacturer-specified communication range up to approximately 1 km
  • Supports IEEE 802.15.4-2011 UWB
  • RF operation approximately 6.0–8.0 GHz
  • Detailed RF range of approximately 6240–6998.9 MHz
  • Supports Band 5/7 operation
  • Maximum data rate up to 6.8 Mbps
  • Supports 110 kbps, 850 kbps, and 6.8 Mbps data rates
  • Supports Two-Way Ranging (TWR)
  • Supports TDOA positioning
  • Manufacturer-specified accuracy down to approximately 10 cm
  • Programmable transmit output power
  • SPI host interface
  • Integrated 38.4 MHz reference crystal
  • Configurable GPIO interface
  • IRQ, reset, and wake-up functionality
  • External SMA antenna connector
  • 3.3 V operation
  • Compatible with DWM1000 footprint/interface
  • Suitable for long-range RTLS and positioning applications

Specifications

Parameter Specification
Model MAX5007-SMA
Manufacturer YCHIOT
UWB IC Decawave DW1000
Wireless Technology Ultra-Wideband (UWB)
Standard IEEE 802.15.4-2011
RF Operating Band Approximately 6.0–8.0 GHz
Detailed RF Range 6240–6998.9 MHz
Channel Bandwidth Approximately 499.2 MHz
Maximum Data Rate 6.8 Mbps
Supported Data Rates 110 kbps / 850 kbps / 6.8 Mbps
Communication Range Up to approximately 1000 m
Positioning Accuracy Down to approximately 10 cm
Ranging Method TWR
Positioning Method TDOA
Host Interface SPI
Typical Supply Voltage 3.3 V
Operating Supply Range 2.2–3.6 V
Sleep Current Approximately 40 µA
Idle Current Approximately 13.4 mA
TX Current Up to approximately 140 mA
RX Current Up to approximately 160 mA, Channel 5
Reference Crystal 38.4 MHz
Antenna External UWB antenna
Antenna Connector SMA
Number of Pins 24
Operating Temperature -40°C to +85°C
Approximate Dimensions 40 × 13 mm
Approximate Weight 3.2 g

Pin Configuration

Pin Signal Function
1 EXTON External device enable
2 WAKEUP Wake-up control
3 RSTn Reset
4 GPIO7 GPIO / Sync
5 VDDAON Always-on supply
6 VDD3V3 3.3 V supply
7 VDD3V3 3.3 V supply
8 GND Ground
9 GPIO6 / SPIPHA / EXTRXE GPIO / SPI phase / RX enable
10 GPIO5 / SPIPOL / EXTTXE GPIO / SPI polarity / TX enable
11 GPIO4 / EXTPA GPIO / PA control
12 GPIO3 / TXLED GPIO / TX indicator
13 GPIO2 / RXLED GPIO / RX indicator
14 GPIO1 / SFDLED GPIO / SFD indicator
15 GPIO0 / RXOKLED GPIO / RX OK indicator
16 GND Ground
17 SPICSn SPI chip select
18 SPIMOSI SPI MOSI
19 SPIMISO SPI MISO
20 SPICLK SPI clock
21 GND Ground
22 IRQ / GPIO8 Interrupt / GPIO
23 GND Ground
24 GND Ground

Recommended Antenna Specification

The MAX5007-SMA requires a suitable UWB antenna connected through its external SMA connector. A standard Wi-Fi antenna should not be assumed to provide suitable UWB performance.

Parameter Recommended Specification
Frequency Range 3.5–8.0 GHz
Impedance 50 Ω
Gain Approximately 3 dBi
VSWR ≤2.0
Polarization Vertical
Radiation Pattern Omnidirectional
Reference Length Approximately 110 mm
Connector Compatible SMA

Note: Antenna is not included unless specifically mentioned in the package contents.

Working Principle

The MAX5007-SMA uses the DW1000 UWB transceiver to transmit and receive very short-duration UWB radio signals. The host microcontroller communicates with the module through the SPI interface and controls functions such as transmission, reception, ranging, configuration, and status monitoring.

For distance measurement, the module can use Two-Way Ranging (TWR). In a typical TWR system, two UWB devices exchange precisely timed messages. The measured signal transmission and reception timing is used to calculate the distance between the devices.

For positioning applications, the module can also support TDOA (Time Difference of Arrival) systems. Multiple fixed anchors can receive signals from a tag, and the differences in signal arrival times can be used to determine the tag’s position.

The integrated PA and LNA help improve the RF link performance, while the external SMA connector allows the use of an appropriate UWB antenna.

Interfacing

The module communicates with a host controller through SPI and can be interfaced with suitable:

  • ESP32 development boards
  • STM32 microcontrollers
  • Arduino-compatible controllers
  • Raspberry Pi
  • Other SPI-capable embedded controllers

For a basic hardware implementation, use a suitable 3.3 V supply with appropriate decoupling. The manufacturer’s recommended implementation includes 10 µF and 0.1 µF decoupling capacitors positioned close to the module.

The SPI signals include SPICLK, SPIMOSI, SPIMISO, and SPICSn. The module also provides IRQ, RSTn, and WAKEUP signals for interrupt, reset, and wake-up control.

Applications

  • Real-Time Location Systems (RTLS)
  • Long-range UWB ranging
  • Indoor positioning systems
  • Outdoor positioning prototypes
  • Industrial asset tracking
  • Personnel tracking
  • Robot localization
  • Autonomous robot navigation
  • Warehouse positioning
  • Anchor and tag networks
  • Two-Way Ranging systems
  • TDOA positioning systems
  • Precision distance measurement
  • Industrial automation
  • Wireless sensor networks
  • Robotics projects
  • IoT positioning systems
  • Embedded UWB applications
  • Research and development projects
  • High-accuracy location tracking

Package Includes

  • 1 × YCHIOT MAX5007-SMA High-Power Long Range UWB Module

Note :-  Antenna is not included.

Product Disclaimer

The communication range of up to approximately 1 km and positioning/ranging accuracy of approximately 10 cm are manufacturer-specified values under suitable conditions and should not be considered guaranteed performance for every installation.

Actual performance may vary depending on antenna characteristics, antenna placement, transmit power, RF configuration, obstacles, line-of-sight conditions, interference, environmental conditions, system calibration, and applicable regulatory transmit-power limitations.

For precision ranging applications, antenna-delay calibration is recommended after the final antenna and hardware configuration have been selected.

The actual module appearance, dimensions, connector position, markings, and other physical characteristics may vary slightly depending on the manufacturing batch.

Frequently Asked Questions

1. What is the YCHIOT MAX5007-SMA?

The YCHIOT MAX5007-SMA is a high-power UWB transceiver module based on the Decawave DW1000 chipset. It is designed for long-range wireless communication, ranging, positioning, RTLS, robotics, and asset-tracking applications.

2. What is the maximum communication range?

The manufacturer specifies a communication range of up to approximately 1 km under suitable conditions. Actual range depends on the antenna, environment, line of sight, RF configuration, transmit power, and regulatory restrictions.

3. What chipset does this module use?

The module is based on the Decawave DW1000 UWB transceiver.

4. What data rates are supported?

The module supports 110 kbps, 850 kbps, and 6.8 Mbps, with a maximum specified data rate of 6.8 Mbps.

5. Does the module support distance measurement?

Yes. It supports Two-Way Ranging (TWR) for UWB-based distance measurement.

6. Does it support TDOA positioning?

Yes. The MAX5007 supports Time Difference of Arrival (TDOA) positioning when used as part of a suitable multi-anchor positioning system.

7. What positioning accuracy can it achieve?

The manufacturer specifies accuracy down to approximately 10 cm under suitable system conditions. Actual accuracy depends on antenna characteristics, calibration, installation, multipath, line of sight, and system design.

8. What interface does the module use?

The module uses an SPI interface for communication with a host microcontroller or processor.

9. Can I use this module with ESP32?

Yes. The module can be interfaced with an ESP32 through SPI, provided the electrical levels, power requirements, pin configuration, and appropriate DW1000 software support are correctly implemented.

10. Can I use it with Arduino?

Yes. It can be interfaced with suitable Arduino-compatible boards that provide an appropriate SPI interface and sufficient software support for the DW1000.

11. Can I use it with Raspberry Pi?

Yes. The module can be connected to a Raspberry Pi through SPI and the required control and interrupt signals.

12. What supply voltage does the module require?

The typical supply voltage is 3.3 V, with a specified operating supply range of approximately 2.2–3.6 V.

13. Does the module include an antenna?

No. The MAX5007-SMA module does not include an antenna unless specifically mentioned in the package contents.

14. What type of antenna should I use?

A suitable UWB antenna should be used. The recommended reference specification is approximately 3.5–8.0 GHz, 50 Ω impedance, around 3 dBi gain, and VSWR ≤2.0.

15. Does the module have an SMA connector?

Yes. The MAX5007-SMA variant has an external SMA antenna connector.

16. How many pins does the module have?

The module has 24 pins, including power, ground, SPI, GPIO, IRQ, reset, and wake-up connections.

17. What is the operating temperature range?

The specified operating temperature range is approximately -40°C to +85°C.

18. Can this module be used for robot localization?

Yes. Its UWB ranging and positioning capabilities make it suitable for robot localization, autonomous navigation, indoor positioning, and anchor/tag-based tracking systems.

19. Can it be used for warehouse asset tracking?

Yes. The module can be used in UWB-based asset tracking and RTLS systems, where tags and fixed anchors are used to determine the location of equipment or other assets.

20. Is the 1 km range guaranteed?

No. The 1 km figure is a manufacturer-specified maximum under suitable conditions. Actual range can be significantly affected by antenna selection, obstacles, line of sight, RF environment, installation, transmit power, and regulatory limitations.

21. Is the 10 cm accuracy guaranteed?

No. The approximately 10 cm figure is a manufacturer-specified performance value under suitable conditions. Proper antenna-delay calibration and system design are important for achieving high ranging accuracy.

22. Does it require antenna calibration?

For precision ranging applications, antenna-delay calibration is recommended after the final antenna and hardware configuration have been selected.

23. What is the module size?

The approximate module dimensions are 40 × 13 mm, with an approximate weight of 3.2 g.

24. Can it be used for indoor and outdoor positioning?

Yes. It can be used for both indoor and outdoor UWB positioning prototypes, subject to appropriate antenna selection, installation, RF configuration, and local regulations.

25. Is this module suitable for long-range RTLS?

Yes. Its high-power UWB design, integrated PA/LNA, DW1000 chipset, TWR/TDOA support, and external SMA antenna interface make it suitable for long-range RTLS development.

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Main Menu

YCHIOT MAX5007-SMA Long Range UWB Module – DW1000, 1 km, SPI

YCHIOT MAX5007-SMA Long Range UWB Module – DW1000, 1 km, SPI

4,944.20 incl. GST (4,190.00 + GST)

Add to cart
0