12864 128X64 OLED 0.96″ 6 Pin SPI Yellow Blue Display Module For Arduino

128X64 OLED 0.96″ Yellow Blue Display Module For Arduino.
SPI Interface. 3.3V/5Volts.

It is 0.96inch SPI OLED display module with 128 columns and 64 rows. Now, your Arduino projects can look great with this bright display.

Instructions (for use with Arduino):
Search for Arafruit SSD1306 in Library manager
Install the library
Open examples->Arafruit SSD1306->SSD1306_128x64_spi
Make connections
GND -> GND
VDD -> 5V
SCK -> D10
SDA -> D9
RES -> D13
DC -> D11
CS -> D12
Put these two lines in your sketch just above the setup() call.
#define SSD1306_LCDHEIGHT 64
#define SSD1306_LCDWIDTH 128
You can follow the instructions here to see the display in action.

Specifications

Size: 0.96
Resolution: 128X64
Color: Yellow Blue
Viewing angle: greater than 160 degrees
Supported platforms: for arduino, 51 series, MSP430 series, STIM32 / 2, SCR chips
Low power consumption: 0.04W during normal operation
Support wide voltage: 3.3V-5V DC
Working temperature: -30-80 degrees
Volume: 27MM * 27MM * 4.1MM
Driver IC: SSD1306
Communication: SPI
No font: The software takes word modulo
Backlight: OLED self light, no backlight

Interface:
VCC: 3.3-5V
GND: Ground
SCL: Serial Clock
SDA: Serial Data
RES: Reset
DC: Data/Command
CS: Chip select active low