-
Quectel EC200U-CN 4G LTE Modem with GPS – 5V TTL & JIO Support
The Quectel EC200U-CN 4G TTL Modem (GPS Edition) combines 4G LTE Cat 1 connectivity with GPS/GNSS positioning for real-time tracking and data communication. With 5V power, TTL UART, Micro USB, and SMA antenna interfaces, it is ideal for vehicle tracking, fleet management, asset monitoring, logistics, and IoT projects.
₹1,947.00 incl. GST (₹1,650.00 + GST)Quectel EC200U-CN 4G LTE Modem with GPS – 5V TTL & JIO Support
₹1,947.00 incl. GST (₹1,650.00 + GST) -
DM002 DIY RC Mini Drone Kit without Camera- Do it yourself Kit
DM002 Mini DIY RC Drone kit with 2.4GHz control, 6-axis gyro, three speed modes and one-key flip. Easy to assemble and ideal for beginners.
₹1,994.20₹2,596.00incl. GST (₹1,690.00 + GST)DM002 DIY RC Mini Drone Kit without Camera- Do it yourself Kit
₹1,994.20₹2,596.00incl. GST (₹1,690.00 + GST) -
MKS DLC32 V2.1 ESP32 WiFi GRBL Offline Controller
The MKS DLC32 V2.1 is a 32-bit ESP32 WiFi GRBL controller designed for desktop laser engravers and GRBL-based CNC motion projects. It features a 3.5-inch TFT colour touchscreen for convenient offline machine control and supports wireless operation over WiFi. With high-frequency PWM, it is suitable for smooth laser power control and grayscale engraving, with speeds up to 8000 mm/min as stated. Compatible with LightBurn and GRBLaser, it is ideal for DIY laser engravers, CNC projects, workshops, and maker applications.
₹2,029.60 incl. GST (₹1,720.00 + GST)MKS DLC32 V2.1 ESP32 WiFi GRBL Offline Controller
₹2,029.60 incl. GST (₹1,720.00 + GST) -
LuckFox Pico RV1103 Linux Micro Development Board Without Pin Header
The LuckFox Pico RV1103 Linux Micro Development Board is a compact Linux development platform based on the Rockchip RV1103 SoC, featuring an ARM Cortex-A7 processor, RISC-V MCU, NPU, and ISP. It provides 0.5 TOPS NPU performance, 64MB DDR2 memory, 24 GPIO pins, USB 2.0, 10/100M Ethernet, and a 2-lane MIPI CSI camera interface supporting up to 4MP @ 30fps. With its AI acceleration and image-processing capabilities, it is ideal for computer vision, robotics, UAVs, smart monitoring, IoT, industrial automation, and embedded AI projects. This is the without pin header version; TF card and other accessories are not included.
₹2,053.20 incl. GST (₹1,740.00 + GST)LuckFox Pico RV1103 Linux Micro Development Board Without Pin Header
₹2,053.20 incl. GST (₹1,740.00 + GST) -
UNITE MY6812 100 Watt DC Gear Less Motor
Model:?MY6812B
Voltage:?12 volts DC
Output:?100 watts
RPM:?2750
Case Length:?3-15/16″ (100 mm)
Case Diameter:?2-11/16″ (68 mm)
Drive Shaft Length:?1-1/8″ (28 mm)
Drive Shaft Diameter:?5/16″ (8 mm)
Mounting Hole Distance:?1-9/16″ (40 mm)₹2,065.00 incl. GST (₹1,750.00 + GST)UNITE MY6812 100 Watt DC Gear Less Motor
₹2,065.00 incl. GST (₹1,750.00 + GST) -
Voice Recognition Module V3.1 For Arduino/Raspberry Pi
Package Contains: 1 Nos Voice Recognition Module V3.1 For Arduino/Raspberry Pi
₹2,065.00 incl. GST (₹1,750.00 + GST)Voice Recognition Module V3.1 For Arduino/Raspberry Pi
₹2,065.00 incl. GST (₹1,750.00 + GST) -
₹2,065.00 incl. GST (₹1,750.00 + GST)
24V 20Amp SMPS Power Supply
₹2,065.00 incl. GST (₹1,750.00 + GST) -
₹2,065.00 incl. GST (₹1,750.00 + GST)3D Printed Four degree Of Freedom Robotic arm DIY with SG90 Servos
₹2,065.00 incl. GST (₹1,750.00 + GST) -
Playstation PS2 Receiver adaptor, 4 DC Motors & 8 PWM Servo controls
The PS2 Receiver, 4 DC Motors & 8 PWM Servo Control Board is an Arduino-compatible expansion board designed for robot cars, robotic arms, and automation projects. It supports up to 4 DC motors, 2 stepper motors, and 8 PWM servo outputs using an I²C control interface. With dedicated PS2 receiver, ultrasonic sensor, and Bluetooth interfaces, it is ideal for wireless robots, MeArm projects, obstacle-avoidance robots, and educational robotics.
₹2,124.00 incl. GST (₹1,800.00 + GST)Playstation PS2 Receiver adaptor, 4 DC Motors & 8 PWM Servo controls
₹2,124.00 incl. GST (₹1,800.00 + GST) -
4-Finger Robotic Arm Mini Mechanical Gripper Kit with N20 Motor DIY
The 4-Finger Robotic Arm Mini Mechanical Gripper Kit with N20 Motor is a compact DIY gripper designed for robotic arms, STEM projects, and mechanical experiments. Made from 3mm black acrylic with 3D-printed parts, it features four synchronized fingers powered by a 6V N20 motor. With a lightweight 102g design, it is ideal for Arduino robotics, educational demonstrations, and custom robotic platforms.
₹2,183.00 incl. GST (₹1,850.00 + GST)4-Finger Robotic Arm Mini Mechanical Gripper Kit with N20 Motor DIY
₹2,183.00 incl. GST (₹1,850.00 + GST) -
TF-LUNA Micro LiDAR Distance Sensor – 0.2m to 8m
The Benewake TF-LUNA Micro LiDAR Distance Sensor is a compact Time-of-Flight (TOF) laser distance sensor designed for accurate and stable distance measurement from 0.2m to 8m. It features low power consumption, high sensitivity, fast measurement, and UART serial communication, making it easy to integrate with Arduino, Raspberry Pi, robots, and UAVs. Its lightweight design is ideal for obstacle detection, robotics, level measurement, intrusion detection, and IoT applications.
₹2,194.80 incl. GST (₹1,860.00 + GST)TF-LUNA Micro LiDAR Distance Sensor – 0.2m to 8m
₹2,194.80 incl. GST (₹1,860.00 + GST) -
Ai-Thinker BU04 Dual-Antenna UWB Positioning Module – DW3000 + STM32F103
BU04 dual-antenna UWB positioning module based on DW3000 and STM32F103, supporting TWR, TDOA and PDOA with up to 10 cm accuracy.
₹2,230.20 incl. GST (₹1,890.00 + GST)Ai-Thinker BU04 Dual-Antenna UWB Positioning Module – DW3000 + STM32F103
₹2,230.20 incl. GST (₹1,890.00 + GST)
Shop By Category
- Hot Promotions
- Clearance Sale
- Artificial Intelligence/AIOT
- Arduino and Shields
- CNC and 3D printing
- Development Boards
- Displays
- DIY and KITS
- E Bike
- IOT and BLE
- Motors
- Motor Drives
- Power Supply
- Prototyping Tools
- Quadcopters and RC
- Raspberry Pi
- Sensors and Modules
- Radar and UWB
- Robotics
- Wireless
- Miscellaneous
