-
XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display
The XY-LPWM Signal Generator is a compact PWM pulse and square-wave generator with an LCD display for monitoring frequency and duty cycle. It supports a wide frequency range of 1Hz to 150kHz and a duty-cycle range of 1% to 100%. The module features dedicated adjustment switches, automatic parameter saving, and TTL serial communication at 9600bps. It is ideal for stepper motor drivers, MCU pulse generation, PWM control, signal testing, and electronic development projects.
₹206.50 incl. GST (₹175.00 + GST)XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display
₹206.50 incl. GST (₹175.00 + GST) -
LuckFox Pico RV1103 Linux Micro Development Board Without Pin Header
The LuckFox Pico RV1103 Linux Micro Development Board is a compact Linux development platform based on the Rockchip RV1103 SoC, featuring an ARM Cortex-A7 processor, RISC-V MCU, NPU, and ISP. It provides 0.5 TOPS NPU performance, 64MB DDR2 memory, 24 GPIO pins, USB 2.0, 10/100M Ethernet, and a 2-lane MIPI CSI camera interface supporting up to 4MP @ 30fps. With its AI acceleration and image-processing capabilities, it is ideal for computer vision, robotics, UAVs, smart monitoring, IoT, industrial automation, and embedded AI projects. This is the without pin header version; TF card and other accessories are not included.
₹2,053.20 incl. GST (₹1,740.00 + GST)LuckFox Pico RV1103 Linux Micro Development Board Without Pin Header
₹2,053.20 incl. GST (₹1,740.00 + GST) -
TF-LUNA Micro LiDAR Distance Sensor – 0.2m to 8m
The Benewake TF-LUNA Micro LiDAR Distance Sensor is a compact Time-of-Flight (TOF) laser distance sensor designed for accurate and stable distance measurement from 0.2m to 8m. It features low power consumption, high sensitivity, fast measurement, and UART serial communication, making it easy to integrate with Arduino, Raspberry Pi, robots, and UAVs. Its lightweight design is ideal for obstacle detection, robotics, level measurement, intrusion detection, and IoT applications.
₹2,194.80 incl. GST (₹1,860.00 + GST)TF-LUNA Micro LiDAR Distance Sensor – 0.2m to 8m
₹2,194.80 incl. GST (₹1,860.00 + GST) -
Automatic On/Off Photocell Street Lamp Light Switch Controller AC 220V 50-60Hz 10A
The Automatic On/Off Photocell Street Lamp Light Switch Controller is a compact light-sensitive switch that automatically turns lights ON at dusk and OFF at dawn. It operates on AC 220V, 50–60Hz and supports a maximum load of 10A / 2200W. Its photocell sensor detects ambient light levels for reliable automatic day/night lighting control. Ideal for street lamps, garden lights, security lighting, pathways, parking areas, solar lighting, and outdoor automation projects.
₹141.60 incl. GST (₹120.00 + GST)Automatic On/Off Photocell Street Lamp Light Switch Controller AC 220V 50-60Hz 10A
₹141.60 incl. GST (₹120.00 + GST) -
₹1,562.32 incl. GST (₹1,324.00 + GST)
CCS811 Air Quality Detection Sensor Module
₹1,562.32 incl. GST (₹1,324.00 + GST) -
₹295.00 incl. GST (₹250.00 + GST)HD-W3A Wi-Fi LED Display Controller Card
₹295.00 incl. GST (₹250.00 + GST) -
MP135 / MP503 Air Quality & Gas Sensor
The MP135 / MP503 Gas Sensor is a compact metal-oxide semiconductor sensor designed for air-quality monitoring and gas detection, with good sensitivity to methane. It features fast response and recovery, low power consumption, good stability, strong anti-interference capability, and long service life. The sensor’s conductivity changes with gas concentration, allowing a simple external circuit or microcontroller to measure the variation. It is suitable for Arduino, IoT, gas detection, environmental monitoring, and DIY electronics projects.
₹389.40 incl. GST (₹330.00 + GST)MP135 / MP503 Air Quality & Gas Sensor
₹389.40 incl. GST (₹330.00 + GST) -
Hi-Link HLK-PM01 5V 3W AC-DC Isolated Power Supply Module
The Hi-Link HLK-PM01 5V/3W AC-DC Power Supply Module is a compact, isolated switching power supply designed to convert 90–264V AC mains input into a stable 5V DC output. With a 3W power rating, it is suitable for powering microcontrollers, sensors, IoT devices, relay modules, automation systems, and other low-power electronics. It features overload and short-circuit protection, low ripple, high efficiency, low power consumption, and natural cooling. Its compact PCB-mountable design makes it ideal for embedded and DIY electronics projects.
₹259.60 incl. GST (₹220.00 + GST)Hi-Link HLK-PM01 5V 3W AC-DC Isolated Power Supply Module
₹259.60 incl. GST (₹220.00 + GST) -
12V DC to 220V AC 40W Step-Up Inverter Booster Module
The 12V DC to 220V AC 40W Step-Up Inverter Module converts 8V–13V DC input into approximately 220V AC output using a high-frequency switching circuit. With a compact 43 × 38 × 25mm design and 40W rated power, it is suitable for DIY inverter projects, battery-powered systems, compatible LED lights, and energy-saving lamps. The output is a high-frequency square wave, so it is not suitable for motors, fans, coils, or other incompatible inductive loads. Do not overload or short-circuit the output, and use proper high-voltage safety precautions.
₹194.70 incl. GST (₹165.00 + GST)12V DC to 220V AC 40W Step-Up Inverter Booster Module
₹194.70 incl. GST (₹165.00 + GST) -
TPL0501 100KΩ 256-Position Digital Potentiometer Module
The TPL0501 Digital Potentiometer Module is a high-precision, single-channel digital resistor featuring 256 programmable positions and 100KΩ resistance. It uses an SPI-compatible interface and operates from 2.7V to 5.5V, making it suitable for Arduino, STM32, ESP32, and other microcontroller projects. It is ideal for sensor calibration, amplifier gain control, voltage adjustment, electronic trimming, and replacing mechanical potentiometers in programmable circuits.
₹566.40 incl. GST (₹480.00 + GST)TPL0501 100KΩ 256-Position Digital Potentiometer Module
₹566.40 incl. GST (₹480.00 + GST) -
TDA1521 Audio Power Amplifier Board Module
The TDA1521 Audio Power Amplifier Board is a dual-channel DIY stereo amplifier module offering a stated 2 × 15W output for compatible speakers. It features an integrated rectifier and filter circuit, allowing connection to a suitable transformer-based power supply. The module is ideal for DIY audio systems, speaker modification, desktop amplifiers, and electronics projects. A sufficiently large heat sink is required before testing or operation to ensure proper heat dissipation and stable performance.
₹188.80 incl. GST (₹160.00 + GST)TDA1521 Audio Power Amplifier Board Module
₹188.80 incl. GST (₹160.00 + GST) -
NE555 Pulse Adjustable Square Wave Signal Generator Module
The NE555 Pulse Adjustable Square Wave Signal Generator Module is a compact signal generator based on the NE555 timer IC, designed to produce adjustable pulse, square-wave, and rectangular signals. It supports a wide 1Hz–200kHz frequency range with four selectable ranges and adjustable duty cycle. Operating from 5V–15V DC, it features an onboard LED indicator and provides a compact 31 × 22mm design. Ideal for frequency testing, PWM experiments, timing circuits, signal generation, Arduino projects, and DIY electronics.
₹50.74 incl. GST (₹43.00 + GST)NE555 Pulse Adjustable Square Wave Signal Generator Module
₹50.74 incl. GST (₹43.00 + GST)
Shop By Category
- Hot Promotions
- Clearance Sale
- Artificial Intelligence/AIOT
- Arduino and Shields
- CNC and 3D printing
- Development Boards
- Displays
- DIY and KITS
- E Bike
- IOT and BLE
- Motors
- Motor Drives
- Power Supply
- Prototyping Tools
- Quadcopters and RC
- Raspberry Pi
- Sensors and Modules
- Radar and UWB
- Robotics
- Wireless
- Miscellaneous
