L298N 2A Dual motor Driver Module for Arduino
₹133.34 incl. GST (₹113.00 + GST)
Product Description
The L298N Dual H-Bridge DC Motor Driver Module is a compact motor driver board designed to control two DC motors independently using Arduino or other microcontrollers. Based on the L298N dual H-bridge driver IC, it can provide up to 2 A per bridge under suitable operating conditions.
The module supports a 5–35 V motor supply and uses a 5 V logic voltage, making it suitable for a wide range of robotics and automation projects. Its dual H-bridge configuration allows control of motor direction and speed using appropriate control signals from a microcontroller.
With onboard driver circuitry and a compact 43 × 43 × 27 mm design, this module is easy to integrate into robot cars, mobile robots, motorized mechanisms, and DIY automation projects.
Features
- Dual H-bridge motor driver
- Based on L298N IC
- Controls two DC motors
- Up to 2 A drive current per bridge
- Supports forward and reverse motor control
- Supports PWM-based speed control
- 5 V logic voltage
- 5–35 V motor drive voltage
- Compact and easy to interface
- Suitable for Arduino and other microcontrollers
- Ideal for robotics and DIY projects
Specifications
| Parameter | Specification |
|---|---|
| Driver IC | L298N |
| Driver Type | Dual H-Bridge |
| Number of Motors | 2 DC Motors |
| Logic Voltage | 5 V |
| Drive Voltage | 5–35 V DC |
| Logic Current | 0–36 mA |
| Drive Current | Up to 2 A per Bridge |
| Maximum Power | 25 W |
| Storage Temperature | -20°C to +135°C |
| Dimensions | 43 × 43 × 27 mm |
| Weight | Approximately 30 g |
Working Principle
The L298N uses two H-bridge circuits to control the direction of two DC motors. By changing the logic signals supplied to the control inputs, each motor can be driven forward or backward.
PWM signals can also be applied through a compatible microcontroller to control the motor speed. This makes the module suitable for applications requiring both direction and speed control.
Applications
- Arduino robot cars
- Two-wheel drive robots
- Mobile robotics
- DC motor control
- DIY automation
- Motorized mechanisms
- Line-following robots
- Obstacle-avoiding robots
- Educational electronics
- Embedded control systems
- Arduino projects
- Microcontroller-based motor control
Package Includes
- 1 × L298N Dual H-Bridge DC Motor Driver Module
Product Disclaimer
The 2 A drive current specification is the maximum single-bridge rating and actual continuous operating current depends on motor load, supply voltage, duty cycle, ambient temperature, and cooling conditions. The L298N can generate significant heat during high-current operation, so suitable thermal management may be required.
Product images are shown for illustrative and representational purposes only. The actual product colour, dimensions, component placement, terminals, and appearance may vary slightly depending on the manufacturing batch.
Frequently Asked Questions
1. How many motors can this module control?
It can control two DC motors independently.
2. What is the motor supply voltage range?
The drive voltage range is 5–35 V DC.
3. What is the maximum current?
The maximum drive current is 2 A per single H-bridge.
4. Can I control motor direction?
Yes. The dual H-bridge allows each motor to be controlled in forward and reverse directions.
5. Can I control motor speed?
Yes. PWM control from a compatible microcontroller can be used for speed control.
6. Can I use it with Arduino?
Yes. The module is commonly used with Arduino and other microcontroller boards.
7. What IC does the module use?
It uses the L298N dual H-bridge motor driver IC.
8. Is this module suitable for robot cars?
Yes. It is suitable for robot cars, mobile robots, line-following robots, and other two-motor projects.
9. Does it require cooling?
Cooling may be required when operating motors at higher current because the L298N can generate heat under load.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet