Roll over image to zoom in
8 Channel Solid State Relay Module SSR Module Board
₹967.60 including GST
1 nos 8 Channel Solid State Relay Module Board
Product introduction:
1, OMRON 5V solid state relay 2A 240V, the output of electrical resistance type fuse 2A. 240V
2, size: 106*56*25 (length * width * high) net weight: 70g
3, input power: DC 5V (160MA)
4, input control signal voltage:
(0-2.5V state low level relay ON)
(3.3-5V state high level relay OFF)
5, 2.54CM pin and blue KF301 terminal control line more convenient.
Module interface:
Input section:
DC+: power supply (by relay voltage)
DC-: negative power source
CH1: 1 relay module signal trigger (active low)
CH2: 2 relay module signal trigger (active low)
CH3: 3 relay module signal trigger (active low)
CH4: 4 relay module signal trigger (active low)
CH5: 5 relay module signal trigger (active low)
CH6: 6 relay module signal trigger (active low)
CH7: 7 relay module signal trigger (active low)
CH8: 8 relay module signal trigger (active low)
High level and low level meaning:
The high level trigger refers to the signal trigger end (in) and the negative electrode of the power between a forward voltage, usually with the anode of the power supply and trigger end connected to a trigger mode, when the trigger end of a positive voltage or voltage reaches the trigger relay is attracted.
Low level trigger refers to the signal triggering between the end and the negative electrode of the power supply voltage is ov, or to say the trigger voltage lower than the positive power supply voltage, low to can trigger voltage, the relay, usually is the negative terminal of the power supply and trigger end connected a trigger mode, so that the relay is attracted.
Please Note: Images are for representation only. The actual Product may differ slightly in appearance.
Reviews
There are no reviews yet.