Sensors & Modules for Robotics, IoT & Automation
Browse sensor modules for motion, distance, environment, current, voltage, industrial monitoring, biomedical projects and embedded systems. Select by interface, supply voltage, measurement range and controller compatibility.
-
TCS34725 RGB Color Sensor Module with I2C Interface
The TCS34725 RGB Color Sensor Module is a high-sensitivity digital color sensor that detects Red, Green, Blue, and Clear light values through an I2C interface. It features a built-in IR blocking filter, onboard LED, 16-bit RGBC resolution, and supports 3.3V/5V operation. The module is ideal for color sorting, product identification, color classification, ambient light sensing, Arduino, Raspberry Pi, and STM32 projects.
₹837.80 incl. GST (₹710.00 + GST)TCS34725 RGB Color Sensor Module with I2C Interface
₹837.80 incl. GST (₹710.00 + GST) -
XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display
The XY-LPWM Signal Generator is a compact PWM pulse and square-wave generator with an LCD display for monitoring frequency and duty cycle. It supports a wide frequency range of 1Hz to 150kHz and a duty-cycle range of 1% to 100%. The module features dedicated adjustment switches, automatic parameter saving, and TTL serial communication at 9600bps. It is ideal for stepper motor drivers, MCU pulse generation, PWM control, signal testing, and electronic development projects.
₹206.50 incl. GST (₹175.00 + GST)XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display
₹206.50 incl. GST (₹175.00 + GST) -
TF-LUNA Micro LiDAR Distance Sensor – 0.2m to 8m
The Benewake TF-LUNA Micro LiDAR Distance Sensor is a compact Time-of-Flight (TOF) laser distance sensor designed for accurate and stable distance measurement from 0.2m to 8m. It features low power consumption, high sensitivity, fast measurement, and UART serial communication, making it easy to integrate with Arduino, Raspberry Pi, robots, and UAVs. Its lightweight design is ideal for obstacle detection, robotics, level measurement, intrusion detection, and IoT applications.
₹2,194.80 incl. GST (₹1,860.00 + GST)TF-LUNA Micro LiDAR Distance Sensor – 0.2m to 8m
₹2,194.80 incl. GST (₹1,860.00 + GST) -
Automatic On/Off Photocell Street Lamp Light Switch Controller AC 220V 50-60Hz 10A
The Automatic On/Off Photocell Street Lamp Light Switch Controller is a compact light-sensitive switch that automatically turns lights ON at dusk and OFF at dawn. It operates on AC 220V, 50–60Hz and supports a maximum load of 10A / 2200W. Its photocell sensor detects ambient light levels for reliable automatic day/night lighting control. Ideal for street lamps, garden lights, security lighting, pathways, parking areas, solar lighting, and outdoor automation projects.
₹141.60 incl. GST (₹120.00 + GST)Automatic On/Off Photocell Street Lamp Light Switch Controller AC 220V 50-60Hz 10A
₹141.60 incl. GST (₹120.00 + GST) -
₹1,562.32 incl. GST (₹1,324.00 + GST)
CCS811 Air Quality Detection Sensor Module
₹1,562.32 incl. GST (₹1,324.00 + GST) -
₹295.00 incl. GST (₹250.00 + GST)
HD-W3A Wi-Fi LED Display Controller Card
₹295.00 incl. GST (₹250.00 + GST) -
MP135 Air Quality & Gas Sensor
The MP135 Gas Sensor is a compact metal-oxide semiconductor sensor designed for air-quality monitoring and gas detection, with good sensitivity to methane. It features fast response and recovery, low power consumption, good stability, strong anti-interference capability, and long service life. The sensor’s conductivity changes with gas concentration, allowing a simple external circuit or microcontroller to measure the variation. It is suitable for Arduino, IoT, gas detection, environmental monitoring, and DIY electronics projects.
₹389.40 incl. GST (₹330.00 + GST)MP135 Air Quality & Gas Sensor
₹389.40 incl. GST (₹330.00 + GST) -
12V DC to 220V AC 40W Step-Up Inverter Booster Module
The 12V DC to 220V AC 40W Step-Up Inverter Module converts 8V–13V DC input into approximately 220V AC output using a high-frequency switching circuit. With a compact 43 × 38 × 25mm design and 40W rated power, it is suitable for DIY inverter projects, battery-powered systems, compatible LED lights, and energy-saving lamps. The output is a high-frequency square wave, so it is not suitable for motors, fans, coils, or other incompatible inductive loads. Do not overload or short-circuit the output, and use proper high-voltage safety precautions.
₹194.70 incl. GST (₹165.00 + GST)12V DC to 220V AC 40W Step-Up Inverter Booster Module
₹194.70 incl. GST (₹165.00 + GST) -
TPL0501 100KΩ 256-Position Digital Potentiometer Module
The TPL0501 Digital Potentiometer Module is a high-precision, single-channel digital resistor featuring 256 programmable positions and 100KΩ resistance. It uses an SPI-compatible interface and operates from 2.7V to 5.5V, making it suitable for Arduino, STM32, ESP32, and other microcontroller projects. It is ideal for sensor calibration, amplifier gain control, voltage adjustment, electronic trimming, and replacing mechanical potentiometers in programmable circuits.
₹566.40 incl. GST (₹480.00 + GST)TPL0501 100KΩ 256-Position Digital Potentiometer Module
₹566.40 incl. GST (₹480.00 + GST) -
TDA1521 Audio Power Amplifier Board Module
The TDA1521 Audio Power Amplifier Board is a dual-channel DIY stereo amplifier module offering a stated 2 × 15W output for compatible speakers. It features an integrated rectifier and filter circuit, allowing connection to a suitable transformer-based power supply. The module is ideal for DIY audio systems, speaker modification, desktop amplifiers, and electronics projects. A sufficiently large heat sink is required before testing or operation to ensure proper heat dissipation and stable performance.
₹188.80 incl. GST (₹160.00 + GST)TDA1521 Audio Power Amplifier Board Module
₹188.80 incl. GST (₹160.00 + GST) -
NE555 Pulse Adjustable Square Wave Signal Generator Module
The NE555 Pulse Adjustable Square Wave Signal Generator Module is a compact signal generator based on the NE555 timer IC, designed to produce adjustable pulse, square-wave, and rectangular signals. It supports a wide 1Hz–200kHz frequency range with four selectable ranges and adjustable duty cycle. Operating from 5V–15V DC, it features an onboard LED indicator and provides a compact 31 × 22mm design. Ideal for frequency testing, PWM experiments, timing circuits, signal generation, Arduino projects, and DIY electronics.
₹50.74 incl. GST (₹43.00 + GST)NE555 Pulse Adjustable Square Wave Signal Generator Module
₹50.74 incl. GST (₹43.00 + GST) -
Hall Effect Sensor Module
The Hall Effect Counter Sensor Module is a compact magnetic detection module based on the 3144E Hall Effect sensor and LM393 comparator. It detects magnets and magnetic-field changes and provides a clean digital HIGH/LOW output, making it ideal for motor speed measurement, wheel rotation, object counting, and position detection. It operates from 3.3V–5V DC, includes power and signal LEDs, and features M3 mounting holes for easy installation. Suitable for Arduino, robotics, automation, and DIY electronics projects.
₹53.10 incl. GST (₹45.00 + GST)Hall Effect Sensor Module
₹53.10 incl. GST (₹45.00 + GST)
