-
Raspberry Pi 3 Model B +
1 Nos Raspberry Pi3 Model B+
₹3,450.00 excl GSTRaspberry Pi 3 Model B +
₹3,450.00 excl GST -
FEETECH FT6560M Digital 65kg Torque high torque low rpm servo motor
1 Nos?FEETECH FT6560M Digital 50kg Torque high torque low rpm servo motor
₹3,450.00 excl GSTFEETECH FT6560M Digital 65kg Torque high torque low rpm servo motor
₹3,450.00 excl GST -
₹3,440.00 excl GST
DIY RC Mini Drone Kit with WiFI Camera- Do it yourself Kit
₹3,440.00 excl GST -
CC3D Open Pilot Flight Controller Board
Package contains:
1 x CC3D Flight Controller
1 x Wire connector
1 x flight controller case₹3,200.00 excl GSTCC3D Open Pilot Flight Controller Board
₹3,200.00 excl GST -
AfroFlight Naze32 Rev6 Flight Controller Board for Multicopter/Quadcopter Drone
1 Nos? AfroFlight Naze32 Rev6 Flight Controller Board for Multicopter/Quadcopter Drone
₹3,200.00 excl GST -
250 Watt My1016Z2 ( DC Geared Motor ) For E Bike
Specifications:
- MY1016Z
- 24 Volt DC Operation
- Permanent Magnet DC Motor
- No Load RPM: 3850
- No Load Current: <2.2 Amps
- Rated Wattage: 250W (0.33 Horsepower)
- Rated Load RPM: 400
- Torque (NM): 22
- Rated Current: 13.4 Amps
- Efficiency: 78%
- Reduction Ratio: 9.78:1
- Direct Drive (No Free Spooling)
- Suitable for Forward and Reverse Operations
- Base Mount Model
- 9 Tooth Sprocket for 1/2″ x 1/8″ Pitch Chain
This motor is capable of rotation in either clockwise or counter clockwise by reversing the motor’s power wires.
For Chain Size: Pitch 0.5in; Roller Diameter 0.3in; Roller Width 0.16in
₹3,160.00 excl GST250 Watt My1016Z2 ( DC Geared Motor ) For E Bike
₹3,160.00 excl GST -
Heliway 902 Series DIY Building Blocks Drone
Package Contains : 1 Nos Heliway 902 Series DIY Building Blocks Drone
₹3,000.00₹4,500.00excl GSTHeliway 902 Series DIY Building Blocks Drone
₹3,000.00₹4,500.00excl GST -
₹2,950.00 excl GSTSipeed MAIX DOC Development Suite Edge Computing
₹2,950.00 excl GST -
₹2,950.00
₹3,250.00excl GSTDigital Blood Pressure Sensor with Serial Output For Arduino/Raspberry Pi -V3
₹2,950.00₹3,250.00excl GST -
6 Inch 350w 24v Brushless Ebike Wheels Scooter Hub Motor for Self-Balancing Scooters Hover Board
Specifications –
Voltage – 24v.
Motor Type – Balance Car, Scooter, Brushless Hub motor.
Power Output – 250w-350w.
Shaft Diameter – Axle size 13.5mm & 16mm, length 53mm.
Wire length – 200mm approx.
Opening size – 110mm.
Color – Black.
Max speed – 26km/h.
Weight – 3kg approx.
Application – Self balancing drift car motor, Razor, electric scooter, light EV Car, E-bike, Electric bicycle, E-scooter, E-motor, motorcycle, small electric motor, etc.₹2,950.00 excl GST -
3.2 Inch Nextion HMI serial Display for Arduino Raspberry Pi
1 pcs 3.2 Inch Nextion HMI display.
₹2,850.00 excl GST3.2 Inch Nextion HMI serial Display for Arduino Raspberry Pi
₹2,850.00 excl GST
