-
650NM 6MM 5V DC 5MW MINI LASER DOT DIODE MODULE HEAD WITH BREAKOUT BOARD
1 Nos 650NM 6MM 5V DC 5MW MINI LASER DOT DIODE MODULE WITH BREAKOUT BOARD
₹47.20 incl. GST (₹40.00 + GST)650NM 6MM 5V DC 5MW MINI LASER DOT DIODE MODULE HEAD WITH BREAKOUT BOARD
₹47.20 incl. GST (₹40.00 + GST) -
37 in 1 Sensor Kit for Arduino Raspberry Pi
1 nos 37in sensor kit for Arduino
₹870.84₹1,327.50incl. GST (₹738.00 + GST)37 in 1 Sensor Kit for Arduino Raspberry Pi
₹870.84₹1,327.50incl. GST (₹738.00 + GST) -
4 Wire Resistive Touch Screen Module For Arduino
1 Nos 4 Wire Resistive Touch Screen module for Arduino
₹354.00₹519.20incl. GST (₹300.00 + GST)4 Wire Resistive Touch Screen Module For Arduino
₹354.00₹519.20incl. GST (₹300.00 + GST) -
₹1,569.40 incl. GST (₹1,330.00 + GST)1500W DC-DC 12-48V to, 24-72V Boost Step Up, Converter For Car, Laptop Solar Battery
₹1,569.40 incl. GST (₹1,330.00 + GST) -
₹588.82 incl. GST (₹499.00 + GST)MH1210W 72V/250V 10A Digital Temperature Controller – -50°C to 110°C
₹588.82 incl. GST (₹499.00 + GST) -
₹533.36 incl. GST (₹452.00 + GST)CJMCU CS5460A Single-Phase Two-Way Energy Metering Module
₹533.36 incl. GST (₹452.00 + GST) -
TCS34725 RGB Color Sensor Module with I2C Interface
The TCS34725 RGB Color Sensor Module is a high-sensitivity digital color sensor that detects Red, Green, Blue, and Clear light values through an I2C interface. It features a built-in IR blocking filter, onboard LED, 16-bit RGBC resolution, and supports 3.3V/5V operation. The module is ideal for color sorting, product identification, color classification, ambient light sensing, Arduino, Raspberry Pi, and STM32 projects.
₹837.80 incl. GST (₹710.00 + GST)TCS34725 RGB Color Sensor Module with I2C Interface
₹837.80 incl. GST (₹710.00 + GST) -
TF-LUNA Micro LiDAR Distance Sensor – 0.2m to 8m
The Benewake TF-LUNA Micro LiDAR Distance Sensor is a compact Time-of-Flight (TOF) laser distance sensor designed for accurate and stable distance measurement from 0.2m to 8m. It features low power consumption, high sensitivity, fast measurement, and UART serial communication, making it easy to integrate with Arduino, Raspberry Pi, robots, and UAVs. Its lightweight design is ideal for obstacle detection, robotics, level measurement, intrusion detection, and IoT applications.
₹2,194.80 incl. GST (₹1,860.00 + GST)TF-LUNA Micro LiDAR Distance Sensor – 0.2m to 8m
₹2,194.80 incl. GST (₹1,860.00 + GST) -
₹1,562.32 incl. GST (₹1,324.00 + GST)
CCS811 Air Quality Detection Sensor Module
₹1,562.32 incl. GST (₹1,324.00 + GST) -
MP135 / MP503 Air Quality & Gas Sensor
The MP135 / MP503 Gas Sensor is a compact metal-oxide semiconductor sensor designed for air-quality monitoring and gas detection, with good sensitivity to methane. It features fast response and recovery, low power consumption, good stability, strong anti-interference capability, and long service life. The sensor’s conductivity changes with gas concentration, allowing a simple external circuit or microcontroller to measure the variation. It is suitable for Arduino, IoT, gas detection, environmental monitoring, and DIY electronics projects.
₹389.40 incl. GST (₹330.00 + GST)MP135 / MP503 Air Quality & Gas Sensor
₹389.40 incl. GST (₹330.00 + GST) -
TPL0501 100KΩ 256-Position Digital Potentiometer Module
The TPL0501 Digital Potentiometer Module is a high-precision, single-channel digital resistor featuring 256 programmable positions and 100KΩ resistance. It uses an SPI-compatible interface and operates from 2.7V to 5.5V, making it suitable for Arduino, STM32, ESP32, and other microcontroller projects. It is ideal for sensor calibration, amplifier gain control, voltage adjustment, electronic trimming, and replacing mechanical potentiometers in programmable circuits.
₹566.40 incl. GST (₹480.00 + GST)TPL0501 100KΩ 256-Position Digital Potentiometer Module
₹566.40 incl. GST (₹480.00 + GST) -
Hall Effect Sensor Module
The Hall Effect Counter Sensor Module is a compact magnetic detection module based on the 3144E Hall Effect sensor and LM393 comparator. It detects magnets and magnetic-field changes and provides a clean digital HIGH/LOW output, making it ideal for motor speed measurement, wheel rotation, object counting, and position detection. It operates from 3.3V–5V DC, includes power and signal LEDs, and features M3 mounting holes for easy installation. Suitable for Arduino, robotics, automation, and DIY electronics projects.
₹53.10 incl. GST (₹45.00 + GST)Hall Effect Sensor Module
₹53.10 incl. GST (₹45.00 + GST)
Shop By Category
- Hot Promotions
- Clearance Sale
- Artificial Intelligence/AIOT
- Arduino and Shields
- CNC and 3D printing
- Development Boards
- Displays
- DIY and KITS
- E Bike
- IOT and BLE
- Motors
- Motor Drives
- Power Supply
- Prototyping Tools
- Quadcopters and RC
- Raspberry Pi
- Sensors and Modules
- Radar and UWB
- Robotics
- Wireless
- Miscellaneous
