-
₹1,569.40 incl. GST (₹1,330.00 + GST)1500W DC-DC 12-48V to, 24-72V Boost Step Up, Converter For Car, Laptop Solar Battery
₹1,569.40 incl. GST (₹1,330.00 + GST) -
₹588.82 incl. GST (₹499.00 + GST)MH1210W 72V/250V 10A Digital Temperature Controller – -50°C to 110°C
₹588.82 incl. GST (₹499.00 + GST) -
XH-W3001 AC 220V 1500W Digital Temperature Controller Microcomputer Thermostat Switch
The XH-W3001 AC 220V 1500W Digital Temperature Controller is a compact microcomputer thermostat designed for automatic heating and cooling control. It supports a temperature range of -50°C to 110°C with approximately 0.1°C control precision and features a clear LED digital display. The controller includes a 1 m stainless-steel waterproof temperature probe and supports up to 10 A / 1500 W AC output. It is suitable for incubators, refrigeration, heating systems, cabinets, seafood machines, and industrial temperature-control applications.
₹159.30 incl. GST (₹135.00 + GST)XH-W3001 AC 220V 1500W Digital Temperature Controller Microcomputer Thermostat Switch
₹159.30 incl. GST (₹135.00 + GST) -
₹118.00 incl. GST (₹100.00 + GST)Mini SD Card MP3 Sound Module WTV020-SD-16P
₹118.00 incl. GST (₹100.00 + GST) -
12V Single Channel Relay Module
The 12V 1 Channel 10A Relay Module is a compact relay board for controlling AC and DC electrical loads using Arduino, Raspberry Pi, and other microcontrollers. It features low-level triggering, COM/NO/NC terminals, power and relay status LEDs, and convenient header pins for easy connections. With switching capability up to 250V AC @ 10A or 30V DC @ 10A, it is suitable for controlling lights, fans, pumps, motors, appliances, and automation projects.
₹54.28 incl. GST (₹46.00 + GST)12V Single Channel Relay Module
₹54.28 incl. GST (₹46.00 + GST) -
XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display
The XY-LPWM Signal Generator is a compact PWM pulse and square-wave generator with an LCD display for monitoring frequency and duty cycle. It supports a wide frequency range of 1Hz to 150kHz and a duty-cycle range of 1% to 100%. The module features dedicated adjustment switches, automatic parameter saving, and TTL serial communication at 9600bps. It is ideal for stepper motor drivers, MCU pulse generation, PWM control, signal testing, and electronic development projects.
₹206.50 incl. GST (₹175.00 + GST)XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display
₹206.50 incl. GST (₹175.00 + GST) -
Automatic On/Off Photocell Street Lamp Light Switch Controller AC 220V 50-60Hz 10A
The Automatic On/Off Photocell Street Lamp Light Switch Controller is a compact light-sensitive switch that automatically turns lights ON at dusk and OFF at dawn. It operates on AC 220V, 50–60Hz and supports a maximum load of 10A / 2200W. Its photocell sensor detects ambient light levels for reliable automatic day/night lighting control. Ideal for street lamps, garden lights, security lighting, pathways, parking areas, solar lighting, and outdoor automation projects.
₹141.60 incl. GST (₹120.00 + GST)Automatic On/Off Photocell Street Lamp Light Switch Controller AC 220V 50-60Hz 10A
₹141.60 incl. GST (₹120.00 + GST) -
₹295.00 incl. GST (₹250.00 + GST)HD-W3A Wi-Fi LED Display Controller Card
₹295.00 incl. GST (₹250.00 + GST) -
MP135 / MP503 Air Quality & Gas Sensor
The MP135 / MP503 Gas Sensor is a compact metal-oxide semiconductor sensor designed for air-quality monitoring and gas detection, with good sensitivity to methane. It features fast response and recovery, low power consumption, good stability, strong anti-interference capability, and long service life. The sensor’s conductivity changes with gas concentration, allowing a simple external circuit or microcontroller to measure the variation. It is suitable for Arduino, IoT, gas detection, environmental monitoring, and DIY electronics projects.
₹389.40 incl. GST (₹330.00 + GST)MP135 / MP503 Air Quality & Gas Sensor
₹389.40 incl. GST (₹330.00 + GST) -
12V DC to 220V AC 40W Step-Up Inverter Booster Module
The 12V DC to 220V AC 40W Step-Up Inverter Module converts 8V–13V DC input into approximately 220V AC output using a high-frequency switching circuit. With a compact 43 × 38 × 25mm design and 40W rated power, it is suitable for DIY inverter projects, battery-powered systems, compatible LED lights, and energy-saving lamps. The output is a high-frequency square wave, so it is not suitable for motors, fans, coils, or other incompatible inductive loads. Do not overload or short-circuit the output, and use proper high-voltage safety precautions.
₹194.70 incl. GST (₹165.00 + GST)12V DC to 220V AC 40W Step-Up Inverter Booster Module
₹194.70 incl. GST (₹165.00 + GST) -
TPL0501 100KΩ 256-Position Digital Potentiometer Module
The TPL0501 Digital Potentiometer Module is a high-precision, single-channel digital resistor featuring 256 programmable positions and 100KΩ resistance. It uses an SPI-compatible interface and operates from 2.7V to 5.5V, making it suitable for Arduino, STM32, ESP32, and other microcontroller projects. It is ideal for sensor calibration, amplifier gain control, voltage adjustment, electronic trimming, and replacing mechanical potentiometers in programmable circuits.
₹566.40 incl. GST (₹480.00 + GST)TPL0501 100KΩ 256-Position Digital Potentiometer Module
₹566.40 incl. GST (₹480.00 + GST) -
TDA1521 Audio Power Amplifier Board Module
The TDA1521 Audio Power Amplifier Board is a dual-channel DIY stereo amplifier module offering a stated 2 × 15W output for compatible speakers. It features an integrated rectifier and filter circuit, allowing connection to a suitable transformer-based power supply. The module is ideal for DIY audio systems, speaker modification, desktop amplifiers, and electronics projects. A sufficiently large heat sink is required before testing or operation to ensure proper heat dissipation and stable performance.
₹188.80 incl. GST (₹160.00 + GST)TDA1521 Audio Power Amplifier Board Module
₹188.80 incl. GST (₹160.00 + GST)
Buy electronic modules online in India for robotics, IoT, embedded systems, automation, prototyping, electronics learning and product development. This category covers support boards and add-on modules used with Arduino, ESP32, Raspberry Pi, STM32 and other controllers, including relay modules, display modules, converter boards, interface modules, communication modules, driver boards and project expansion modules.
Choose a module based on its function, operating voltage, logic level, communication interface, connector type, output rating, isolation requirement, size and controller compatibility. Common project needs include switching loads with relay modules, converting signal levels or protocols, adding displays, expanding I/O, connecting RS485 devices, testing USB/serial communication, driving motors or LEDs and building complete IoT prototypes.
Useful module-related categories: Sensors and Modules, Sensors, Displays, Motor Drivers, Industrial RS485 & Modbus Sensors, UWB Modules and IoT and BLE.
Related categories: Development Boards, ESP32 Boards, Arduino and Shields, Wires and Cables, Connectors and Power Supply.
